ALARM bc presents type of bnc connectors

Different Type of BNC Connectors.

FORMS

Related to Alarm Permits, False Alarm, Security License etc..

You are able to post messages, jobs offer or if you need work, buy & sell equipment , contractor requirements or any message to alarm and security community

Please post these messages only on the password protected area of message board
( Restricted for Alarm Tech Personal )

CONTACT US

3 Piece Crimp On - We always thought these were the best, but time consuming to install and required some training to install properly. If using a coax with a stranded center conductor these are a must. You must have the proper crimp tool to install this connector.
	2 Piece Crimp On - These have been very reliable for us in 75 ohm video surveillance installation. In fact we use these almost exclusively today due to their quick installation, and the fact that most of our vendors keep them on hand for both RG-59 and RG-6 coax. Note: they are only usable on solid center conductor cables. A good crimper is suggested fro installation of these connectors, but we have seen decent installations done with the inexpensive crimpers available in your local electronics stores.
Twist On - Many installers use these as a quick and dirty installation, but we have seen them have many problems no matter how carefully they are installed.

Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
UPDATE 30-Mar-2010