Omnia Wireless Receiver

Code-Hopping Technology
This feature changes the code sent to the OMN-RCV3 by the motion detectors, door contacts and remote controls after every transmission, thereby ensuring greater security.

Remote Controls
Omnia can support up to 8 (Spectra) or 16 (Digiplex/DigiplexNE) remote controls without occupying any zones in the system. Each remote control (OMN-RCT1) is assigned to a particular user, enabling the receiver to identify who used a particular remote control and what action was performed. This information can then be reported to the central monitoring station. Each button or combination of buttons on the remote control can be individually programmed to perform one of either 13 (Spectra) or 15 (Digiplex/DigiplexNE) specific actions, such as arming, disarming, generating panic alarms and activating PGMs.

Auto-Panel Recognition
Omnia works with Spectra (except 1758 and 1758EX), Digiplex and DigiplexNE systems by detecting which control panel it is connected to and adjusting its internal parameters to function accordingly. An industry first, this technology eliminates the need for different modules for each line.

The versatile 433MHz wireless door contact (OMN-DCT1) has two built-in high-sensitivity reed switches that allow you to place the door contact either vertically or horizontally.

A switch or a detection device can be connected to the universal transmitter input terminals in order to provide wireless transmission of the device's open/close status to the Omnia Wireless Receiver Module.

• One high-sensitivity reed switch
• Range of 100m (300ft) line of sight
• Operates with one 3V lithium battery
• Anti-tamper switch
• Dimensions: 4.4cm (1.7") X 3.0cm (1.2") X 1.7cm (0.7")

Alive software

How do you know if your wireless motion detector is still functioning if it's in Energy Save Mode? With the Omnia motion detector's exclusive Alive software, you always know. Its flashing red LED indicates a detection even when the detector is in Energy Save mode-without compromising battery life. After transmitting an open zone, the Omnia detector activates its Energy Save Mode. For the next 5 minutes, the detector does not transmit any open zones to conserve battery life.
But with Paradox's exclusive Alive software, the motion detector continues to flash its red LED to indicate a detection without transmitting an open zone. This means that you always know when Omnia has detected something and that the detector is still functioning.With Alive, users get continuous detection display with maximum battery life, something that's especially useful in high-traffic areas.

• Performs up to 8 customizable actions
• Transmission up to 300ft (100m)
• Two long-life 3V lithium batteries included
• Water-resistant