AlarmsBC presents mlr2 central station receiver by dsc

Include: flash memory for easy upgrades and individual line processing. Each line card is hot-swappable and can be programmed via a PC. Digital Signal Processing (DSP) increases recognition accuracy, allowing for greater flexibility when adding new features.

The system is backwards compatible and can also be fitted with a variety of Sur-Gard line cards including the DRL2E, and the DVL2A for DVACS* communication, DRLV-A Single-line Video Receiver Module, DRL-IP for network and internet monitoring ,

CPM2 CENTRAL PROCESSOR UNIT ( LEFT )
DRL2 E 2- LINE DIGITAL MODULE ( RIGHT )

Sur-Gard makes expansion simple with its line card expansion system, giving you the ability to grow your central monitoring station easily and economically. Any combination of cards can be added, up to 15 in total, to the same SG-CPM2 platform.

MLR2E Multi Line Receiver

Digital and DVAC capabilities UL, ULC, CE, BABT approved

CPM2 CENTRAL PROCESSOR UNIT ( LEFT )
DRL2 E 2- LINE DIGITAL MODULE ( RIGHT )

click for a larger picture

Expansion

Start off with 2 lines, and as your requirements increase, simply add on DRL2E line cards. The MLR2-E can be expanded to a maximum of 30 telephone lines, requiring 15 DRL2E line cards. The DRL2E is backwards compatible; if you wish to expand and already have an MLR2-DG, it is as easy as adding on the new DRL2E module. The system can also be fitted with a variety of Sur-Gard line cards including the DRL2A, and the DVL2A for DVACS* communication.

Diagnostics

The CPM2 systematically polls each line card and in turn, the line cards supervise the CPM2 polling. Computer verification is tested systematically with heartbeat test signals and during computer outages all information is stored in the event memory. The unit will also monitor printer activity to determine readiness and paper status.

Monitoring

All programming on the MLR2-E can be verified on the LCD display or printed. Printer events, computer events and all caller activity can be displayed and printed for verification. Generous data memory allows for a large event buffer.

DNIS and Caller ID
* Dialled Number Identification System

The MLR2-E receiver utilizes DNIS signal management; this feature permits faster response to an incoming call,reducing online time and therefore, provides extensive savings to the central station. Built-in Caller ID allows the operator to trace misprogrammed or malfunctioning diallers, as well as interference.

Profiles

Using DNIS and Caller ID allows the profile to be selected before the call is answered and configures the line card to provide the correct handshake first, saving you on-line time and increasing efficiency � the first handshake is always the correct handshake. Dedicated equipment for specific tasks is no longer needed.

• Program memory space to spare-capacity to meet new demands, and decode new formats, growing and changing
as your needs do.
• Powerful 16 Bit Microprocessor
• Non-Volatile RAM on each DRL2E line card module for the programmable configuration and the 256 event memory buffer.
• Communication Formats Available:
- ITI
- SIA (FSK) format, tone and data acknowledge (Level 1, 2, 3).
- ADEMCO CONTACT ID, DTMF with checksum.
- ADEMCO EXPRESS
- Acron 3-8 or 4-8 DTMF
- SUR-GARD DTMF 4-3 formats with and without checksum.
- Franklin/Ademco/Radionics 3-1, 4-1, and 4-2 format10/14/20
and 40 baud, with and without checksum.
- Super Fast Ademco or High Speed DTMF 4-8-1
- BFSK, Modem II, IIE
- SILENT KNIGHT FSK 1, 2
- For others, consult distributor or factory.
• 1400 Hz, 2300 Hz, dual tone, and FSK handshakes, with
handshake order selection (up to 6 different handshakes).

• DVL2A dual line card module available for Multiplex
(DVACS Compatiblee); adaptable to radio.
• Output for 2 way audio (listen in).
• 128 event memory buffer on the CPM2.
• Downlook video integration.
• Real time clock.
• 1 parallel printer port and 2 serial RS232 ports.
• Programmable serial port configuration:
- Wait for ack time, baud rate, data bits, parity.
• Fast transmission (no delay) of multiple alarms to the computer and printer, for quick operator response.
• Computer format with time and date, sent with or without supervisory signal. (heartbeat), can be selected.
• 3 programmable outputs (sw. neg.) one with “option” LED.
• Outpust for acknowledge, trouble and buzzer.
• Low battery detection and automatic disconnect of discharged battery to extend battery life.
• AC loss detection and battery supervision.
• Telephone line supervision.
• Each line card has serial control lines, for audio, video or other custom application.
• External Ack input for wiring of normaly open contact.

DRL2E Digital Receiver Line Card Module

The DRL2 E includes many features, all designed to make the receiver easier to use. Separate Liquid Crystal displays, microprocessors and power supplies for each of the line cards and for the CPM2, combined with special programming, means independence - all your eggs are not in the same basket. The line cards can even keep working with the CPM2 removed from the rack.

drl2a.gif (27885 bytes)

click for a large picture (unit on left)

Caller identification capability is built in and telephone numbers can be displayed, printed out, transmitted to the host computer and stored in memory.
256 event non-volatile memory on each DRL2 E line card module and on the CPM2.
Built-in 2 Way Audio (Listen In)
Downlook Video Integration.
Several languages available for printer library.
Multiple receivers and receivers in different cities can be joined in a network controlled from one master location.
The receiver is capable of processing signals from communicators in low speed, high speed, Fast DTMF, SIA, Vonk, ModemII/IIE, ITI, Robofon, FSK 200, Contact ID, Outel and a variety of other formats over the same phone line.

2 digital lines
DSP Pro c e s s i n g
Expands MLR2-E to 30 lines
Flash Memory
Caller ID
Two-way voice re c e i v i n g
Can be programmed from the CPM2 or PC with console software
Individual line pro c e s s i n g
DNIS re c o g n i t i o n

CPM2 - CENTRAL PROCESSOR UNIT

CPM2 - Central Processing Unit

click for picture (unit on right)

Monitors operation and performance of all line cards

Heartbeat feature for automation supervision

Hot-swappable

1 parallel printer port

1 serial RS232 port

128 event buffer

16 bit micro-controlle

SG-DRL-IP Network Line Card Module

The DRL-IP receiver line card is designed to integrate with the Sur-Gard MLR2 family of central station receivers. It provides seamless integration within a monitoring facility, and instantly adds network support to existing automation software. As a facility grows, the receiver can be expanded to support up to a total of 15 DRL-IP modules per receiver. All information communicated to the DRL-IP module is displayed on two large LCD screens.

The new T-Link TCP/IP (Internet Protocol) transmitter works within your existing Intranet (LAN and WAN) to communicate alarm signals efficiently and economically to the new DRL-IP central station receiver line card or to The Reporter IP� monitoring software. Constant connection to the monitoring station provides for a fully supervised link between the module and the panel. Any indication of tampering or network connection trouble is detected by the module, which allows the administrator to respond to the situation instantly. Through the use of DSC�s DLS-3 or System Administrator software, site administrators can request information from the panel, change user information, generate status reports, gather daily maintenance details (schedules, arm/disarm information) from a personal computer via the TCP/IP network.

Fe a t u res
� 2 easy to re a d, large LCD info r ma t ion displays
� E x p a ndable up to 15 DRL-IP mo dules per CPM2
� Hot swappable
� Add on module to the MLR2-DG/M L R 2 - E receiver line of products
� Seamless int e g ra t ion with ex i s t i ng automation software

Communication Fo r m a ts
� Compatible with 10BaseT or 100BaseT Ethernet

P ro g ra m m a b le
� From CPM2 Keypad or from Console software

Internal Diagnostics
� The CPM2 systematically polls each line card
� The line cards supervise the CPM2 polling

D i m e n s i o ns
� Weight: 1.8kg/ 4.0lbs
� Height: 12.9cm/5.1�
� Width: 21.3cm/8.4�
� Depth: 24.8cm/9.8�

S p e c i f i c a t i o ns
� RJ45 socket for quick connection to network
� Debug port

DVL2A for DVACS* communication

DVL2A for DVACS* communication	DVACS Line Card Module Compatible with DVACS network: Listed for ULC (Level 3) Provides a high level of security Monitors master leg with carrier detect for phone line trouble 256 event buffer per module (*For use in Canada only)

MLRV-A - DOWNLOOK VIDEO RECEIVER MODULE

The MLRV-A is a single-line video receiver module designed to add Downlook video capabilities to the Sur-Gard MLR2-DG Digital Receiver. The MLRV-A Module may be connected to any DRL2E Line Card installed in the MLR2-DG Receiver. In its maximum configuration, the MLR2-DG Receiver can monitor up to 14 digital lines or a combination of MLRV-A Modules and digital lines The MLRV-A, via the DML5A backplane, provides for two video outputs: a simple coaxial output to a video monitor and a video data bus output for PC connection. The DLGB Downlook grabber board and the PSA software must be used for PC connection.
MLRXV - VIDEO EXPANSION CAGE FOR 4 MLRV-A

DML2A - BACKPLANE CIRCUIT BOARD
MLRX - RECEIVER EXPANSION CAGE DRL2A
MLRXE - RECEIVER EXPANSION CAGE DRL2E

� Copyright 1997- 2010
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
UPDATE 18-Jan-2010
MMC&S Inc.