DT-400
MICROWAVE / PIR TECHNOLOGY
MICROWAVE SUPERVISION & RANGE ADJUSTMENT
AUTOMATIC TEMPERATURE COMPENSATION
PATENTED "LOOK-DOWN" ZONES
FCC, UL , IC , CE

DT-420T     20'x20'
DT-435T     35'x30'
DT-435TC  35'x30' (ULC)
DT-450T     50'x40'
DT-450TC  50'x40' (ULC)

 
DT-640STC    40' x 40' (12 m x 12 m)
DT-660STC    60' x 60' (18 m x 18 m)
DT-6100STC  100' x 20' (30 m x 6 m)

DT-600

The IntelliSense DT-600STC series motion sensors combine the reliability of microwave/PIR technology with an innovative form of signal processing: The IntelliSense patented Microcontroller Advanced Processing (MAP). Functioning as the onboard computer, the microcontroller analyzes signals and distinguishes between false alarms and actual intruders. This processing provides the ultimate in catch performance and protection against false alarms.

MICROWAVE / PIR TECHNOLOGY (MAP processing)
MICROWAVE SUPERVISION & RANGE ADJUSTMENT
BUILT IN DIAGNOSTICS AND SUPERVISION
SMALL ANIMAL IMMUNITY
TRUE AUTOMATIC TEMPERATURE COMPENSATION
PATENTED "LOOK-DOWN" ZONES
FCC , UL , ULC , IC , CE

DT-6360STC

360° field-of-view, mounting height from 8' to 16' (2.4m to 4.9m),

Physical Dimensions
White, high impact, ABS plastic housing
5" H x 5 " W x 2-1/2 " D
(13 cm x 13 cm x 6 cm)

Operating Temperature
32°-120°F (0°- 49°C); 5% to 95% relative humidity, non-condensing

The DT-6360STC is a ceiling mount motion sensor with a 360 degree range of intrusion detection. This sensor is a member of the IntelliSense DUAL TEC DT-6STC motion sensor family. Based on dual microwave/PIR technology, the DT- 6360STC uses an onboard microcontroller for Microcontroller Advanced Processing (MAP) to enhance catch performance and false alarm immunity. The sensor's 50' (15 m) diameter detection pattern makes it an ideal choice for both commercial and industrial applications.

MICROWAVE / PIR TECHNOLOGY (MAP processing)
MICROWAVE SUPERVISION & RANGE ADJUSTMENT
BUILT IN DIAGNOSTICS AND SUPERVISION
TROUBLE OUTPUT
TRUE AUTOMATIC TEMPERATURE COMPENSATION
PATENTED "LOOK-DOWN" ZONES
FCC , UL , ULC , DTI , CE

50' DIAMETER

 Range:
35’ x 35’ (11 m x 11 m)

PIR Fields of View:
22 long range edges
12 intermediate edges
Six lower edges
Four look-down edges

DUAL Technology Motion Sensor
K-Band Technology

The DT-7235 DUAL TEC ® Motion sensor provides reliable protection with pet immunity up to 100 lbs. in a simple installation configuration that requires no adjustments. Optimum performance is achieved using K-Band microwave technology and Uniform Sensitivity Optics.

Fast and Simple Installation Without Adjustments - No adjustments are necessary. Installers simply mount the unit at the recommended height, conduct a brief walk-test and the sensor is ready. A highly visible, single colored LED helps the installer easily identify range from any distance or angle within the pattern.

Dimensions:
4.685" x 2.795" x 1.654"
11.9 cm x 7.1 cm x 4.2 cm

Operating Temperature:
14° to 131° F (-10° to 55° C)
5% - 95% relative humidity non-condensing

Alarm Relay:
Energized Form A
500 mA, 30 VDC

Tamper: (DT-7235T only)
(NC) 50 mA, 24 VDC

Power Requirements:
7.5 - 16 VDC
(8.9 - 14.5 VDC for UL installations)
25 mA

AC Ripple: 3 V peak-to-peak at
12 VDC nominal

Frequencies:
24.125 GHz (K-band)

PIR White Light Immunity:
6,500 lux typical

RFI Immunity:
30 V/m, 10 MHz - 1000 MHz

DT-7435 / DT-7435C

DUAL Technology Motion Sensor
K-Band Technology

The fully-featured DT-7435 motion sensor achieves reliable protection with improved false alarm immunity through DualCore™ signal processing. K-band microwave technology and Uniform Sensitivity Optics ensure optimum performance.

 Reliable Detection With 100 lb. Animal Immunity
The combination of DualCore signal processing, Uniform Sensitivity Optics and K-Band technology, provides installers with both quality detection and the ability to ignore pets or other animals up to 100 lbs.

Advanced DualCore Signal Processing
DualCore signal processing analyzes PIR and microwave signals through the microcontroller. It supports a multitude of advanced functions, including Concurrent Diagnostics, Digital Fluorescent Light Interference Filter, Digital Adaptive Microwave Threshold, adaptive baselines, and Bi-Directional Temperature Compensation.

Enhanced False Alarm Prevention Features

The DT-7435 protects against false alarms due to RF signals, electrostatic discharge, and electrical overstress. The patented black bug guard improves white light immunity and digital adaptive microwave thresholds automatically adjust for room disturbances.

Range:
35’ x 35’ (11 m x 11 m)

Alarm Relay:
DT-7435: Energized Form A
DT-7435C: Energized Form C
125mA, 25VDC, 20 Ohm series resistor

Tamper:
(NC) 50mA, 24VDC

Power Requirements:
7.5 - 16VDC (8.0 - 16VDC for UL installations)
DT-7435: 25mA typ., 30mA max. at 12VDC
DT-7435C: 30mA typ., 35mA max. at 12VDC

AC Ripple: 3V peak-to-peak at 12VDC nominal

Frequencies:
24.125GHz (K-Band)

PIR White Light Immunity:
6,500 Lux typical

Fluorescent Light Immunity:
50Hz or 6 Hz, selectable

RFI Immunity:
30 V/m, 10MHz - 1000MHz

Operating Temperature:
14° to 131° F (-10° to 55° C)
5% - 95% relative humidity (non-condensing)

Self-test Intervals:
Microwave supervision - Continuous
PIR self-test  - Once every hour
Temp. Comp. - Every 30 seconds

PIR Fields of View:
22 long range edges
12 intermediate edges
six lower edges
four look-down edges

Dimensions:
4.685" x 2.795" x 1.654"
(11.9 cm x 7.1 cm x 4.2 cm)

Sensitivity:
Standard: 3-4 steps
Intermediate: 2-3 steps

DT-900 Series Motion Sensors

The DUAL TEC® DT-900 Series provides versatile, sturdy and reliable detection for large commercial applications. Each model within the series has a choice of detection pattern coverage by just twisting a screwdriver. DT-900 and DT-901 models provide a wide angle pattern for protecting square-shaped areas. DT-906 and DT-907 models provide a long, narrow detection pattern for protecting aisles and corridors.

Active Infrared Anti-Masking is available on the DT-900 and DT-906 models. When someone tries to mask the sensor—for example, by throwing a box or tarp over it—an active infrared circuit inside the unit sends a signal to the control panel. A dedicated Mask Relay is used, so the sensor can indicate there has been a masking attempt even when it is not armed.

Technology
PIR for intrusion detection
Microwave for intrusion detection
(DT-900 & DT-906)
Active Infrared for anti-masking

Physical Dimensions:
20 cm x 17 cm x 15 cm
(8" x 6-1 /2" x 6")

Weight:
Product : 1.36 kg (3 lbs)
Pkgd Product: 1.6 kg (3.5 lbs)

Alarm Relay:
Energized Form C; 25 VDC, 125 mA
22 ohm series protection resistor

Tampers:
Wall & bottom cover (DT-900 & DT-906)
Top cover (all models)
30 VDC, 25 mA (N.C.)

Anti-Mask (DT-900 & DT-906) & Trouble Relays:
De-energized Form B (Normally Closed) relays,
30 VDC, 25 mA

Power Requirements:
10 - 15 VDC; 35 mA (max) at 12 VDC
AC ripple: 3 V peak-to-peak at nominal 12 VDC

Operating Temperature:
0° to 49° C (32° to 120° F);
5% to 95% relative humidity, non-condensing.

PIR White Light Immunity:
6500 LUX

RFI Immunity:
30 V/m, 10 MHz to 1000 MHz

Microcontroller-Based Dual Technology
The use of two technologies, microwave and passive infrared (PIR), combined with microcontroller-based advanced signal processing, provides excellent detection while virtually eliminating false alarms and costly service calls.

Quest 2220

Microwave/PIR Motion Sensors

• 20' x 25' (6m x 8m) coverage pattern
• Microprocessor-based C³ processing
• Split-Zone Optics technology provides robust pet immunity to 100lbs
• Accu-trak environmental test feature
• Advanced, dual slope temperature compensation
• Automatic environmental adaptation
• Microwave and PIR sensitivity adjustment
• Horizontal and vertical coverage pattern adjustment
• Sealed optics protects against insects
• Continuous supervision of both PIR and microwave channels with separate Trouble Output
• Infinite rejection of fluorescent lights with patented digital filter
• Tamper switch
• Available with Form C relay as Quest 2220C
• Optional swivel bracket available (998SB)
• 6 year over-the-counter warranty

·  OPERATION:
   Alarm duration ................... 2 seconds
   Walk speed ....................... 0.5 to 10ft/s
     ........................................ (0.15 to 3.0m/s)
   Nominal mounting height .... 7.5 ft (2.3m)
   Jumper .............................. Alarm LED on/off

· IMMUNITY
   RF immunity
     ....... S 30 V/m over range 0.01 to 1200 MHz
   Transients at terminals ...... 2.4kV at 1.2 joules
   Static discharge immunity ..... 25kV
   White light ............ 20,000 Lux at the detector
   Operating temperature
     ........................... 32° to 122°F (0° to 50°C)
   Humidity ....... 5% to 95% RH non-condensing