AlarmsBC presents DSC wireless devices for maxsys envoy and power series

EQUIPMENT DSC

Wireless_Devices
Central Station
CCTV
Fire Alarm
Gas/CO-Detectors
Dual Detectors
Glass Break Detector
PIR (motion detector)
Environmental
Magnetic Contacts
Transformers
Batteries
Siren

Discontinued
Items

POINTS
of
INTEREST

Metric Imperial US Conversion
Frequently Asked Question
Statistics
How Devices Works
Y2K

FALSE ALARMS

False Alarms Fees
British Columbia
California
Other US Cities

FREE LINK
TO
AlarmsBC

CONTACT US

DSC WIRELESS DEVICES

BACK TO WIRELESS

Wireless Devices ( contacts, motion detector, panic pendant etc..) are compatible with :

PC4164 V2.1 RF Receiver module from Maxsys

PC5132 RF Receiver from Power Series Control Panel

Envoy the Self-contained wireless security systems

Power Series Self-contained 9047 wireless security systems

DSC PC-5132 WIRELESS RECEIVERS FOR POWER SERIES PANELS

DSC PC-4164 WIRELESS RECEIVERS FOR MAXSYS PANELS

LCD5501Z32 Fixed Message LCD Keypad with Integrated Wireless Receiver

PC5320 Multiple Wireless Receiver Module

PC5349 Multiple Frequency Wireless Receiver Module

WLS906-433Mhz Photoelectric Smoke Alarm Discontinued

WLS907-433Mhz Universal Transmitter Discontinued

WLS907T-433Mhz Low Temperature Sensor Discontinued

WLS908-Panic Pendant Discontinued

WLS909-433Mhz Wireless Key Discontinued

WLS911-Siren/Repeater Discontinued

WLS915 - Door Window Contact Discontinued

WLS917- Recessed Door / Window Contact Discontinued

WLS919--433Mhz Keyfob with Button Cover Discontinued

WLS935L-433Mhz Slim-line Transmitter with Wall Tamper Discontinued

WLS904PL-433Mhz Passive Infrared Motion Detector

WLS914-433Mhz Pet Immune Motion Detector Dual Element

WLS912L-433Mhz Glassbreak Detector

WS4916ULC-433Mhz Photoelectric Smoke Alarm & heat detector

WLS925L-433Mhz Slim-line door / window Transmitter

WS4938 Keyfob 1 button

WS4939 Keyfob 4 button

WS4959 Keyfob 5 button

900 Mhz. is not used anymore; been replaced with 433 Mhz.

Wireless Receiver pc-5132

433 MHz (900MHz is Discontinued) Spread Spectrum Wireless Receivers

	This receiver module, which can be placed anywhere on the system, will receive signals from up to 32 wireless sensors. Each sensor is supervised for low battery and tampering. Features a orthogonal antenna arrangement for better RF reception. Detects RF jamming as a zone tamper. The wireless sensors can be assigned to zones 1 to 32 only.

LCD5501Z32 Fixed Message LCD Keypad with Integrated Wireless Receiver
LCD5501Z32 Fixed Message LCD Keypad with Integrated Wireless Receiver

The LCD5501Z32 keypad/receiver combines a Fixed Message LCD keypad, a PC5132 wireless receiver and an on-board zone input into a simple integrated product, making the addition of wireless accessories, such as sensors, keys, and keypads, quick and easy.

PC5349 Multiple Frequency Wireless Receiver Module

Can be used to connect both 433MHz and 900MHz receiver PowerSeries compatible compatible with PC5132-433 V4.24 PC5132RS v3.00+

PC5320 Multiple Wireless Receiver Module

Can be used to connect up to 4 wireless receivers to any PowerSeries control
panel for increased coverage
The PC5320 module supports:
- PC5132-433
- RF5501-433
- RF5108-433

MAXSYS PC4164 - 433Mhz RF Receiver

(North American Market)

Now up to eight PC4164 receivers can be enrolled on the MAXSYS PC4020 v3.2 control panel, increasing security and extending coverage of wireless zones.

The PC4164 receives signals from DSC wireless devices such as universal transmitters (WLS925), glassbreak detectors (WLS912), and PIR motion detectors (WLS904, WLS904P).

WLS904PL Passive Infrared Motion Detector
with pet immunity

fully supervised by controller for:- tamper, low battery, device fault
wall, corner, or ceiling mounting
2 lithium batteries (supplied)
Pet Imune - Multiple pets up to 60 LB
Vertical beam shaping lens*
Coverage up to 40�L x 40�W (12.2 x 12.2m)
Good false alarm immunity and catch performance
high traffic shutdown mode
- - prolongs battery life by automatically stopping reports to the system controller if the detector is activated more than once in a 3 minute period. Detector resumes normal transmissions to the controller after a 3 minute period of no activity

WLS914.jpg (8037 bytes) WLS914 Pet Immune Motion Detector
Dual Element

Specifications

high traffic shutdown mode

- prolongs battery life by automatically stopping reports to the system controller if the detector is activated more than once in a 3 minute period. Detector resumes normal transmissions to the controller after a 3 minute period of no activity

fully supervised by controller for:- tamper, low battery, device fault
wall, corner, or ceiling mounting
power requirement: - 4AAA batteries (supplied)
Pet Imune - Single pet up to 85 LB
Coverage up to: 40'L x 50'W (12.2 x 15.2m)
Two dual-element low noise sensors
Excellent false alarm immunity and catch performance

WLS907 Universal Transmitter
Discontinued

Specifications

may be used as a self contained magnetic door or window contact or as a terminal connection for an external device
2 internal reed-switch contacts
Accommodates different mounting requirements when used as a self contained door or window contact
fully supervised by controller for:

- tamper - low battery
- device fault - open/close

power requirement: 3 AAA alkaline batteries (supplied)

WLS907.jpg (6675 bytes) WLS907T Low Temperature Sensor
Discontinued

� Sends an alarm when a pre-defined low temperature is reached
� The pre-defined temperature points at which an alarm and restoral condition are sent are:

- Alarm: 43�F � 3�F (6�C � 2�C)

- Restoral: 48�F � 3�F (9�C � 2�C)

� Fully supervised

� 3 AAA batteries (supplied)

WLS915 Door Window Contact
Discontinued

Specifications

may be used as a self contained magnetic door or window contact

complete with surface mount magnet

fully supervised by controller for:
- tamper - low battery - device fault - open/close

power requirement:

- 1 lithium battery (supplied)

WLS917 Recessed Door / Window Contact
Discontinued

Specifications

flush-mount transmitter for concealed door and window contact applications
complete with flush mount magnet
fully supervised by controller for:
- tamper - low battery - device fault - open/close

power requirement:

- 1 lithium battery (supplied)

WLS912L Glassbreak Detector

Exceptional microphone frequency range provides excellent sound capture at low sound levels and distances up to 25ft (7.6m)

detection of all common types of framed glass including plate, wired, tempered, and laminated
detector also accommodates different types of frame construction, glass thickness, and room acoustics
detection range: up to 25ft. (7.6m)
internal sensitivity selection switch
fully supervised by controller for:

- tamper - low battery- device fault

power requirement:

- 2 Lithium batteries (supplied)

AFT-100 Glass Break Simulator ensures reliable installation and response

WLS911 Siren/Repeater
Discontinued

The siren/repeater functions as the Marquis system's alarm siren and audible annunciator for features such as door chime and walk test. Further, the first siren/repeater in the system functions as a redundant RF communications path providing 'True Diversity' to ensure that signals from the system's components reach the controller:

900MHz Spread Spectrum wireless operation

up to 2 siren/repeaters per system

93dB high output piezo siren - volume adjustable

door chime

transistor output switch to activate remote siren

fully supervised by controller for:

low battery	tamper
AC failure	device fault

power requirement:

- 12V ac adapter (supplied)
- 6V 1.2Ah sealed battery (supplied))

operating temperature:

- 32� to 122�F (0� to 50�C)

WLS906 Photoelectric Smoke Alarm
Discontinued

Specifications

UL/ULC Listed
design provides

- maximum smoke detection
- exceptional resistance to dust, insects and air turbulence thereby lowering false alarms

90� smoke detection pattern
RED solid-state LED indicator light
loud 85dB piezoelectric alarm horn
automatic self-test once every 40 seconds with visible and audible trouble indication for low smoke sensitivity and low battery
manual user sensitivity test button with local indication of test result
installer's test mode allows test locally or by transmission to Central Station
fully supervised by controller for:

- tamper - low battery
- device fault - low sensitivity

tampered to ceiling for protection against unauthorized removal
power requirement:

- 6 AA alkaline batteries (supplied)

WS4916ULC Photoelectric Smoke Alarm
smoke detector with built-in heat detector

ws4916

. This low-profile detector incorporates :

Low profile design
Automatic drift compensation
High/Low sensitivity reporting
Built-in, dual-sensor heat detector
135 �F (57 �C)
Easy-maintenance removable chamber
Local test button
Built-in 85 dB horn
Non-contact sensitivity testing with FSD-100 test-meter
UL listed 268 / ULC listed S531 for residential applications

WLS908 Panic Pendant
Discontinued

Sends alarm to the system by pressing the pendant buttons
Transmits alarm whether alarm system is armed or not
Small and light enough to be placed in a shirt pocket or tucked inside a purse
Press the 2 outside buttons for 2 seconds to transmit a panic alarm
Manual test button allows user to check operation and test battery via visual indication on system keypad

WLS909 Wireless Key
Discontinued

Commonly used functions include

Stay Arming.....to arm alarm system in the Stay mode. All perimeter zones will be armed - e.g., all window and door contacts - but the interior zones will remain inactive, allowing the premises to remain occupied without creating an alarm
Away Arming.....to arm alarm system in the Away mode. Both the interior and exterior zones will be armed, allowing occupants to exit the premises
Disarm.....to disarm alarm system. User does not have to enter an access code when using the key to disarm the system
Fire.....to notify the central monitoring station of a fire condition
Auxiliary.....to notify the central monitoring station of a non-medical emergency
Panic.....to notify the central monitoring station of a situation requiring the police, such as a break-in
Automatic Functions.....such as turning lights on / off, opening / closing and locking / unlocking doors etc.
4 programmable function buttons
- each key can be programmed differently

WLS919 Keyfob with Button Cove
Discontinued

Commonly used functions include

Water resistant
2 Long life lithium batteries included
Stay Arming.....to arm alarm system in the Stay mode. All perimeter zones will be armed - e.g., all window and door contacts - but the interior zones will remain inactive, allowing the premises to remain occupied without creating an alarm
Away Arming.....to arm alarm system in the Away mode. Both the interior and exterior zones will be armed, allowing occupants to exit the premises
Disarm.....to disarm alarm system. User does not have to enter an access code when using the key to disarm the system
Fire.....to notify the central monitoring station of a fire condition
Auxiliary.....to notify the central monitoring station of a non-medical emergency
Panic.....to notify the central monitoring station of a situation requiring the police, such as a break-in
Automatic Functions.....such as turning lights on / off, opening / closing and locking / unlocking doors etc.
4 programmable function buttons
- each key can be programmed differently

WLS925L Slim-line Transmitter

A magnetic door or window contact
Complete with surface-mount magnet
1 Lithium battery included
Terminal connection for an external contact

WLS935L Slim-line Transmitter
with wall tamper
Discontinued

A magnetic door or window contact

Complete with surface-mount magnet

1 Lithium battery included

Terminal connection for an external contact

Tamper Switch

WS4938

	Activation via one large, easy-to-use button Attractive, compact design Full two-second delay on panic button Integrated LED to indicate signal transmission Neck strap included Reliable 433MHz technology Multifunction clip included Water resistant Long-life lithium batteries included UL/ULC approved Supervised

WS4939

ws4939

Wireless Key
4 programmable function keys
Small compact design
Integrated LED to indicate a transmission
Silk-screen buttons (durable, easy to see)
Belt clip included
Includes optional generic rubber button insert
433 MHz technology
Uses long life lithium batteries
Full 3 second delay on panic key to reduce false alarms
Compact, attractive design
Durable, scratch-resistant buttons
Optional generic rubber insert
Eight designer cases (optional)

WS4959

	12 programmable functions Attractive, compact design Integrated tri-color LED to indicate signal transmission and security modes Four durable, scratch-resistant buttons and center toggle button Multifunction clip included Reliable 433MHz technology Full three-second delay on panic function Long-life lithium batteries included FCC/IC approved

AREA FOR
ALARM COMPANIES
AND SECURITY
EMPLOYEES

=CENTRAL STATIONS PROTOCOLS
=SOFTWARE
=INSTALLATION TIPS and NOTES
=FORMS
=PRODUCTS OVERVIEW
=TECH SUPPORT PHONE NUMBERS

WEB HOSTING

=DATA CENTER and
CONNECTIVITY
=VIRTUAL PACKAGES DETAILS
=VIRTUAL PACKAGES PRICES
=WEB CONTROL PANEL
=POLICIES

LINKS TO
RELATED SITES

DAILY NEWS

UNIVERSAL CURRENCY CONVERTER

CONTACT US

� Copyright 1997-2008
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
UPDATE 23-Mar-2008
MMC&S Inc.