-Glass Break Detector
-PIR (motion detector)
-Tips to Improve Security
-False Alarms Fees
-Other US Cities
SUPPORT PHONE NUMBERS
=WEB CONTROL PANEL
UNIVERSAL CURRENCY CONVERTER
CONTROL PANEL -
Pictures PCB Boards
Zone Expansion Module PC-5108
Adds 8 hardwired zones to the alarm system.
Adds 8 hardwired general purpose burglary or fire zones provides
125mA @ 12VDC auxiliary current, PTC protected
Connect up to 1000' (305m) from control panel via KEYBUS module
current draw : 35mA @ 12VDC
Adds 8 programmable outputs to the alarm
system. Each output is rated at 50mA. Can be programmed to
respond to one of 14 different system conditions . Ideal for
interfacing to home automation controller (Stargate, Time Commander Plus,
or HomeVision) or directly to X10 PowerFlash Module.
Four Output High Current Module
||Provides 1 Amp of
additional current (at 12VDC) for the alarm system and components.
Also adds 4 high current programmable outputs for door strikes,
bells, and more. Requires it's own 16VAC 40VA transformer , backup
battery , and enclosure
Power supply modules
Provides up to 1 Amp @ 12 VDC
Fully supervised for AC failure, low battery and AUX failure
Compatible with Power864 control panels
Allows the alarm system to print
reports to a serial printer. Prints 40 or 80 column on
printers with baud rates of 300, 1200, 2400, or 4800. Prints:
zone, time, date & event type as they occur.
- both PC5400 and PC5400DV may be used at the same time on a system
- provides ULC Level 3 Line Security.
- provides full DVACS reporting of all system events.
- module is pre-programmed to SIA zone definitions
- events simultaneously communicated via DVACS and other installed
communications mode such as digital or cellular
- full cross supervision between the system control panel and the
DVACS module e.g… problems with one will be communicated to the
central station by the other.
- central station requires Sur-Gard receiver with DVL2A version 2 or
- complete with 8 pin jack, and communications and power cables for
connection to F1/F2 subset.
- connect up to 1000' (305m) from control panel via KEYBUS
- module current draw : 65mA @ 12VDC
Compatible with all PowerSeries control panels
Assisted Telephone Control:
PC5580TC ESCORT MODULE WITH
BUILT IN THERMOSTAT INTERFACE and WITH BUILT IN INTERFACE FOR X-10
The Escort telephone access module can turn any touch-tone
telephone, any- where in the world, into a Power system keypad with clear
voice prompting and full customer control of their integrated security
system. The system's voice prompt gives plain language prompts in English,
French, or Spanish, directing you through the system. Remote telephone access is
available from your car, your office, or even your vacation spot.
Built in X-10 interfaces: . Transmit 32 X-10 commands.
Global/Partition Control 16 schedules, 8 modes. Customized Commands, Access
Module contains extensive library of voice prompts ie this
unit talks back to you. Program up to 6 words per label, 180 pre-
programmed system words, 241 pre-programmed library words.
Thermostat control supports also up to four EMS-100 thermostats.
PC5700 DUAL Telephone Line Monitoring
The PC5700 module is both a dual-line dialer module
and an 8-zone hardwire expander module that can be used with the power
series control panels. The module is typically used for fire
applications and is only available in Canada. The module provides 4
general-purpose zones, 2 Class ‘A’ supervisory water flow zones, a
ground fault detection zone and a telephone line trouble zone.
PC5900 Audio Verification Module
Talk/Listen-in audio verification module
Up to four audio stations, four microphones (PC5921) and two speakers
(PC5904), can be connected
Remotely controlled via touchtone phone
Compatible with Power series control panels
All programming can be performed at the system keypad or remotely
using DLS2002 software
Low current draw on main system (100mA)
500ft (152 m) maximum speaker range
1,000ft (305m) maximum microphone range
PC5921 Two-way audio verification station
Interior Intercom Station
|Two-way intercom, background music and room
station can be used to initiate or receive pages, answer incoming
calls, answer the doorbell, monitor rooms or sound an alarm
follower. An audio interface module installed with the
main controller is required. Each
station must be home-run to the interface module using shielded 22
gauge, 4-conductor wire.